This one should come with a warning THIS WILL KILL ALL DATA ON THE STORAGE SYSTEMS. ALL ARRAYS WILL BE LOST.
at a commandline type clear storageSubsystem configuration
For more information on commands for the DS Range, view the following document http://www-947.ibm.com/systems/support/supportsite.wss/docdisplay?lndocid=MIGR-5076792&brandind=5000028
Add Comment
 
 
I was trying to setup a VIF on a system that only had 2 ethernet ports. I was doing this over the Filerview web interface but it kept failing to add the second ethernet connection.
As I'm a true techie I moved to the commandline - but I still had issues. It transpires that ethernet commands made at the commandline are not persistant over reboots! I know. CRAZY! By the book you should directly edit the config file - but in this case Microsoft came to my rescuse. The MMC created the VIF no problem at all!
I don't think Netapp have support for the MMC, I believe it is an IBM creation - so there is a reason to go IBM Nseries as opposed to vanilla Netapp.

Todays lesson is REMEBER THAT CHANGES TO ETHERNET MADE ON THE COMMAND LINE DO NOT SURVIVE REBOOTS!
Add Comment
 
 
Well done Tony Dimagio for the best write up of this I've ever seen. Very easy to follow.
http://tonydimaggio.com/blog/?p=17
Add Comment
 
 

If you are trying to upgrade a single controller IBM DS3400 to a dual controller the sytem must be told that it is now a dual controller model - otherwise the "manage controller" icon is not available to pring the new controller on line. To do this enter the following command at the CLI

Smcli ctlr_A_IP_address -c "set storageSubsystem redundancyMode=duplex;"

1 Comment
 
Create a free website with Weebly